When your conveyor belt snaps right in the middle of harvest or feed processing, you don’t have time to wait for a repair shop. These Flexco clipper lacing hooks give you the power to make a strong, reliable splice right on the farm. With 67 hooks per strip and 10 strips in this retail box, you’ll have enough to handle multiple repairs or keep spares on the shelf.
What You’re Getting
- 67 galvanized hooks per 10-inch strip give you excellent holding power across the full belt width
- Retail packaging makes it easy to grab what you need and keep the rest organized
- Standard 3 – 4-1/2 size works with belt thicknesses from 1/4 inch to 9/32 inch
- Requires .109 inch diameter pins for installation—standard size that’s easy to find
- Galvanized finish resists rust and corrosion in tough farm environments
Built for Real Farm Work
These hooks are designed for the conveyor belts you’ll find on grain elevators, feed mixers, manure spreaders, and other farm equipment. The 10-inch width covers most standard agricultural conveyors, and the hook spacing gives you a secure connection that won’t let go under normal operating loads.
Made to Last
Flexco has been making belt lacing for decades, and these clipper hooks are built to their usual standards. The galvanized steel construction handles moisture, dust, and temperature swings without breaking down. Once installed properly, this lacing should give you years of reliable service.
Good to Know
You’ll need a clipper lacing tool to install these hooks properly—trying to do it by hand usually doesn’t end well. Make sure your belt ends are cut square and clean for the best results. If you’re new to belt splicing, take your time on the first one and check that the hooks are seated evenly before putting the belt back in service.
