When your rotary cutter starts leaving strips of uncut grass or just beating down brush instead of cutting it clean, it’s time to swap out those worn blades. A dull blade doesn’t just make your cutting job look rough—it puts extra strain on your tractor’s PTO and burns more fuel. This 18-inch counter-clockwise replacement blade brings back that sharp, clean cut you need for pasture maintenance and brush hogging.
What You’re Getting
- Heavy-duty 1/2-inch thick construction that holds up to rocks and hidden stumps
- Counter-clockwise updraft rotation that lifts material for a cleaner cut
- Precision 1-1/2-inch center hole with proper offset for balanced operation
- 16-inch cutting radius that covers plenty of ground on each pass
- AgSmart quality manufacturing with attention to proper weight distribution
Built for Real Farm Work
This blade is designed for John Deere rotary cutters used on utility and compact tractors. Whether you’re maintaining pastures, cutting roadside ditches, or clearing fence rows, this blade handles the tough jobs that lighter equipment can’t touch. The counter-clockwise rotation creates an updraft that stands up tall grass and weeds for a more even cut.
Made to Last
The heavy 1/2-inch thickness gives this blade the mass it needs to maintain momentum through thick material while resisting damage from the rocks and debris you didn’t see coming. Quality steel construction means it’ll hold a sharp edge longer and won’t crack or chip under normal farm use.
Installation Notes
This is a direct replacement that mounts with your existing hardware. Always replace blades as a complete set to maintain proper balance—mismatched blades cause vibration that’s hard on your tractor and spindles. Make sure to torque the blade bolt to specification and check for any play in the center hole before putting the cutter back to work.
