When you’re getting ready for planting season, every component in your planter’s drive system has to work just right. This drive sprocket transfers power from your planter’s main drive to operate the seed meters and other critical components. If yours is worn down or has broken teeth, you’ll get inconsistent seed placement or complete drive failure right when you need it most.
What You’re Getting
- 19-tooth sprocket designed for 41 chain with precise 7/8 inch hex bore
- Direct replacement that fits like the original with proper chain alignment
- Sturdy construction that handles the constant cycling of planter operation
- 2-1/8 inch working width and 2.85 inch overall width for reliable power transfer
Built for Real Farm Work
This sprocket powers the metering systems on John Deere 7000, 7200, and 7300 Series planters along with MaxEmerge Plus and MaxEmerge XP models. It also fits 1700 Series planters and 1530/1535 drills. These are the workhorses that plant everything from corn and soybeans to specialty crops, where consistent seed spacing can make the difference between a good year and a great one.
Made to Last
Planter drive components take a beating with constant engagement, dirt, and the shock loads that come with field work. This replacement sprocket is built to handle those conditions season after season, with properly machined teeth that mesh smoothly with your chain and maintain proper timing.
Good to Know
Installation is straightforward—just make sure the hex bore is clean and properly seated on the drive shaft. A little anti-seize compound on the hex shaft helps prevent future removal headaches. While you’ve got things apart, it’s a good time to check your drive chain for stretch and wear.
