When your center pivot or irrigation equipment starts making grinding noises or won’t turn smoothly, it’s usually that driveline giving you grief. A worn-out irrigation driveline can shut down your whole watering system right when your crops need it most. This 36-inch Series 1350 driveline gets you back to irrigating fast, handling up to 75 horsepower without breaking a sweat.
What You’re Getting
- Robust 36-inch length handles the torque demands of irrigation motors and gearboxes
- 75 HP rating means it won’t let you down even with larger pivot systems
- Series 1350 construction built for the constant rotation and vibration of irrigation equipment
- Direct replacement design saves you time and headaches during busy irrigation season
Built for Real Farm Work
This driveline connects irrigation motors to the drive mechanisms on center pivot systems, traveling irrigators, and other irrigation equipment. Whether you’re running a diesel engine, electric motor, or gas-powered setup, this shaft transfers power reliably through thousands of rotations per season. It’s designed for the non-stop duty cycle that irrigation demands during peak growing season.
Made to Last
Irrigation equipment runs in dusty, wet conditions that eat up lesser drivelines. This Series 1350 shaft uses heavy-duty universal joints and a reinforced tube that stands up to the elements. The sealed bearings keep dirt and moisture out while the robust construction handles the shock loads from starting and stopping heavy pivot systems.
Good to Know
Installation is straightforward—just disconnect the old driveline at both ends and bolt in the new one. Make sure your equipment is completely shut down and locked out before starting work. A little grease on the splines makes assembly easier, and don’t forget to check that your safety shields are in good shape while you’re at it.
